How to Replace a Car Fuse

Learn How to Replace a Car Fuse

In your car, the electrical system ties everything together, including the engine controller, power windows, interior/exterior lighting, audio-visual system and alarms. If one of these systems ceases to function without warning, your first stop should be the fuse box. Once you’ve identified which fuse is blown, you’ll need to learn how to replace a car fuse.

What Is a Fuse Box?

The location of the fuse box may vary depending on the vehicle’s make and model. In many automobiles, the fuse boxes are located in the engine bay or beneath the dash, so check your car’s manual to find its exact location.

Car fuse

Fuse boxes are essentially hubs that distribute electricity. To protect the wiring, a fuse sits between the main bus line and the component — the brake lights, for instance. Under normal conditions, the fuse allows electricity to flow from the battery to the brake light switch, which, when depressed, sends that electricity to the brake light bulbs.

On the other hand, what if one day your brake lights cease to function? Your first step should be to check the fuse. Once you’ve located the box, the appropriate fuse should be clearly marked “Brake,” or something similar. If in doubt, turn to the owner’s manual, which will point you to exactly which fuse feeds the brake lights.

How to Test and Replace a Car Fuse

Unlike copper and aluminum wiring, fuses are made from a softer metal. In case of a short circuit, the softer metal in the fuse heats up faster than copper wiring would, causing the fuse to melt and cut off electrical flow through the circuit. Without this protection, a short circuit could easily overheat the copper wiring and cause substantial collateral damage or result in a fire. Testing the health of a car fuse typically requires no more than a visual inspection or testing with an in-block fuse tester.

Most fuse boxes come with a fuse puller, a small plastic tool to remove and install fuses. You could use a pair of needle-nose pliers, but you risk causing a short circuit or — in the case of older, glass fuses — breaking the fuse before you get a chance to inspect it.

Remove the fuse and hold it up to the light. The small filament should be continuous from one side to the other. If the filament is melted, it means that something overheated the circuit. If in doubt, use a multi-meter to check for continuity across the two terminals. If the fuse has burned out, simply insert a new fuse of the proper amperage rating in the slot. Your car’s manual contains information about proper amperage for each slot.

Know Your Amperage

What if the fuse burns out again as soon as you insert it, turn the car on or step on the brake? Do not replace the fuse with one of a higher amperage rating. For example, if the brake light fuse is rated for 10 amps (A), do not replace it with a 15 A or 20 A version. If the fuse blows, this means that there is something wrong with the circuit and the fuse is protecting the wiring as intended. Further diagnosis will be necessary to determine the cause of the problem so you can fix it properly to prevent damage to the wiring and the rest of your car.

For more information on how to replace a car fuse, chat with a knowledgeable expert at your local NAPA AUTO PARTS store.

Image courtesy of Flickr

about author

Benjamin Jerew

Ben has been taking things apart since he was 5, and putting them back together again since he was 8. After dabbling in DIY repairs at home and on the farm, he found his calling in the CGCC Automobile Repair program. After he held his ASE CMAT for 10 years, Ben decided he needed a change. Now, he writes on automotive topics across the web and around the world, including new automotive technology, transportation legislation, emissions, fuel economy and auto repair.

related articles

LEAVE A REPLY

Your email address will not be published. Required fields are marked *